Kick tips - How To Black Out Adidas Boost Midsoles by @FeatureSneaker

Kick tips - How To Black Out Adidas Boost Midsoles by @FeatureSneaker

Check out this video from @FeatureSneaker on how to black out your Adidas Boost midsoles using Angelus products! 


1. Angelus Deglazer - (Buy Here)

2. Angelus Jet Black leather dye - (Buy Here)

3. Angelus Flat black paint - (Buy Here)

4. Angelus Matte Acrylic Finisher - (Buy Here)

5. Cotton balls/white rag

6. One small and one medium sized paint brush

Step 1 - Prepare The Midsole

Pour some Angelus Deglazer onto a cotton ball or a white rag. Using the cotton ball, rub gently against the midsole until you see the gloss finish on the midsole become dull; making the midsole a matte white color. (Don't use too much Deglazer and do not rub to hard or else it will eat away at your sole). Let the shoe dry for 5 minutes then proceeded to the next step.

Step 2 - First Coat Of Paint

Start to apply the Angelus Black Leather Dye using a small paint brush until the surface of the midsoles is completely black. For added precaution, apply painters tape over any Primeknit surface that you don't want painted on. (To ensure a better turnout, apply 2 coats of Black Leather Dye. Let the first coat dry for 10 minutes, then proceed to apply the second coat.)

Step 3 - Add A Matte Finish

Apply 2 coats of Angelus Flat black paint with a medium sized brush, using the same technique as in step 2. Wait 10 minutes after each coat is applied before applying the next coat. (OPTIONAL: To add a semi-glossy finish apply a coat of Angelus Matte Acrylic Finisher using the same technique as the previous two steps.) Let the paint set for 24 hours before you wear.

Share this
Older Post Newer Post